Description
ISITMAX, which has been producing underfloor heating systems since 1995, produces Cold Room Underfloor Heating Cable to maintain the temperature of the areas outside the cold storage rooms and offers it to your valuable customers. Another area of use for underfloor heating systems used in industrial and commercial buildings is Cold Storage.
Cold rooms (cold storages), which have temperatures up to -40 degrees due to their functions, cause the temperature to drop outside the room and damage the foundation or floor areas, even though they are insulated. In this direction, you can have an ISITMAX Cold Room Underfloor Heating Cable, which is used to thaw the frost formed in the soil, in the areas outside the cold storage, and you can prevent damages from occurring.
You can lay ISITMAX Cold Room Underfloor Heating Cables not only on cold rooms but also on the outdoor floors of ice rinks where similar problems are experienced, and you can greatly contribute to the benefit of insulation.
The system, which is applied to the cold room floor under concrete and must be covered with at least 5 cm of screed or flooring mortar; It consists of control panel, thermostat and sensors. By automatically activating, reaching the desired temperature values on the floor and thus preventing the floor from freezing, it also relieves the building safety as well as stacking products and navigating in the cold room.
ISITMAX Cold Room Underfloor Heating Cables are an ideal product for use in narrow and cornered areas thanks to their flexible structure. Heating cables can be mounted on çesan irons before pouring concrete, or they are mounted on the ground with fixing elements on the foundation concrete or over the insulation. The main purpose here is to keep the form of the cables intact before pouring concrete. Cables must be laid at certain intervals in order to provide the desired Watt power per square meter and to spread the heat to the entire floor. They must be fixed in accordance with the values specified in the installation manual in order to maintain these intervals and to prevent the cables from overlapping or getting too close.
Placing the floor sensor correctly and placing the control panel in a suitable area are very important for the correct operation of the system. Heatingx Cold Storage floor heating cables and mattresses are guaranteed for 10 years. Control Panel equipment and thermostats used for the control of the system are guaranteed for 5 years.
We want you to know that we design the most suitable floor heating systems for cold storages with the knowledge and experience we have in underfloor heating systems.
regards
