Detached House Floor Heating Systems

Detached House Floor Heating Systems

29 September 2020 by in Uncategorized

Detached house underfloor heating systems it can be done for all rooms of your home, while it can also be done for a single room. With the underfloor heating system, an efficient and contemporary heating solution is found for your home.

Ground heater systems; it offers design freedom during the renovation phase of your home, while offering lower and longer-term operating costs compared to traditional heating systems. Heating performs underfloor heating systems in accordance with every room in your home and all types of subfloor and coatings.

Are Radiators In the House Replaced for Ground Heating?

Underfloor heating; it works in contrast to the operating system of centrally heated radiators, aimed only at heating the air of a room. That is, underfloor heating uses radiant heat technology to heat objects and people in the room above the ground.

This technology, on the other hand, makes underfloor heating into heating systems that show greater efficiency than radiators. It saves energy, while at the same time reducing dust circulation, allowing the air in the house to change.

underfloor heating radiators in the house can be replaced. After it is determined that there is a floor that is properly ins isolated and can be heated with a floor heater, a heat loss calculation is required on the room. In areas with smaller floors, such as small bathrooms, additional heating may also be required.

What are the differences between ground heating and radiator?

Detached house underfloor heating systems there are some fundamental differences between radiators and radiators. Using an underfloor heated system instead of a radiator, it is up to you to get rid of radiators completely.

  • Heat dissipation
  • Comfort and air quality
  • Aesthetic
  • Cost
  • Zoning heating are the main differences between radiators and underfloor heating systems.

If you want to use only the underfloor heated system in your home as the only source of heat, it is necessary to first calculate heat loss . Heat loss calculation; indicates whether the heat output of the underfloor heating system meets the heating requirement of the room or area. The point to note here is that; it is that the maximum heat output must be greater than the maximum heat loss in order to have enough heat in the room.

What is the Best Floor Covering for Detached House Floor Heating?

Underfloor heating systems the suitability of the flooring materials to be used for is important. That is, the material must have thermal conductivity. How quickly and efficiently the produced heat is emitted to the ground surface is related to the floor covering to be used.

The best type of flooring for underfloor heating is tile and stone. Other than that, it can be used suitable floor coverings include;

  • Tile, stone and polished screed flooring
  • Laminate flooring
  • Wood and engineering timber flooring
  • Vinyl flooring
  • Rubber floor
  • Carpet and rug flooring

Apart from these, polished concrete; provides fast warm-up time and high conductivity. Although marble is good thermal conductor, it shows slower warming.

How Long are the Heating Times on Different Floors?

Each material has different thermal mass and conductivity. Therefore When choosing flooring material on the flooring floors of the detached house, it is necessary to take into account the warm-up times.

The lower the thermal mass and the higher the conductivity, the faster the heat from the underfloor heating pipe or wire is transferred. It should also be noted that materials with low thermal mass cool faster than materials with high thermal mass.

What is the Effect of Floor Covering Material on Heat Output?

underfloor heating Since some floor coverings in their systems are the system that limits the highest level of heat output, the choice of flooring affects the top-level heat output of the system. Heat output; the general heated base area of a system and the air depends on the ground temperature.

It is necessary to ensure that the heat output from the floor is greater than the number of room heat loss. The two-degree heat difference in ground temperature is enough to make a big difference in the heat output. So if the selected floor heats up to only 27 degrees and does not meet your expectations, floor polish that can heat up to 29 degrees is used to ensure the heat output.

What should be the floor size for the detached house floor heating system?

Knowing the heat output in the underfloor heating system plays an important role in reaching the desired temperature of the room. The last thing desired here is that after the installation of the system, the room is cold. Therefore, to know the heat loss and as a result, to have a good it is necessary to choose an underfloor heating system.

The size of the heated floor area should be directly proportional to the heat output. That’s because I’m not going to let the larger the heated area, the higher the top-level heat output of the system.

In addition, according to the total room size, the size of the heated floor area will also increase the heat loss, since the room is large. The small size of the house to be heated will again cause heat loss, if the insulation is poorly made.

What should be the power of the ground heating system?

In underfloor heating systems, the maximum power is indicated in Watts per square meter. If the floor is well ins isolated, the underfloor heating system power is usually 65-85 Watts/m Must be between 2.

Since underfloor heating systems will not be constantly on, a system of 150-200 Watts/m2 is usually determined to reduce heating times.

How to Limit Space in Detached House Floor Heating System?

Underfloor heating system; high conductive floor coverings are preferred if the wire or pipe is to be installed in a small area where it can be installed. Using soft floor coverings, tile and stone flooring can be selected to reach high ground temperature.

In the bathrooms, heated towel hangers and wall heaters are one of the ideal choices, as they contribute to the necessary heat output. If the selected material is tile, the heat moves faster. If a porous material such as wood is selected, the situation is different. Either way, the heat is evenly spread throughout the material, until it provides thermal equilibrium.

How to Use Ground Heating In Bathrooms and Other Rooms?

Single-storey house underfloor heating systems or bathrooms of detached houses, under fixed fixtures of underfloor heating. Here only small parts of the ground surface are heated. This will greatly affect the heat output.

The size of a heated floor area depends directly on the heat output. That is why it is necessary to heat the entire floor area as much as possible. With its expert and experienced team, a preliminary work is carried out in your home and all the necessary planning is made and you can underfloor heating can be installed.

You can reach our previous article from https://www.isitmax.com/isi-pompasi-nedir/ link.

Switch The Language
    Cart
    Sohbeti Başlat
    ISITMAX A.Ş
    Merhaba, ben Volkan Şimşirkaya. Ürünlerimiz, fiyatlar, teknik destek ve diğer konularda hızlıca yardımcı olabilirim. Lütfen sohbet başlatınız