How should ground heating cleaning be?
Like all heating systems in our homes, underfloor heating system gets dirty over time and needs maintenance. But underfloor heating cleaning requires a little more meticulous work than other systems. The pipes of the heating systems that we normally use in our homes pass through the surface of the house, and radiators are in places that are easy to clean. But since pipes are installed under the floorboards in underfloor heating cleaning, it is necessary to work a little more meticulously and carefully about its cleaning. It is recommended to seek professional help with underfloor heating cleaning.
How to Contaminate the Ground Heating System?
The water pipes in the underfloor heating system inevitably calcify after a while. In addition, mudslides and sediment accumulated inside damage the system and the yield you get when you use it decreases. When underfloor heating cleaning is not carried out regularly, a bad smell may occur over time. When done regularly, it prevents bad formations and prevents clogging, sedimentation and degradation of water pipes and parts of the installation leading to your boiler. To prevent them, some chemicals are used into the pipes during underfloor heating cleaning.
Cleaning the Ground Heating System
Honeycomb cleaning and underfloor heating cleaning are completely separate issues. In underfloor heating, water and air are supplied into the system, but honeycomb cleaning is not done in this way. Underfloor heating is also much easier and more frequently contaminated than other systems. If the necessary interventions are not made, blockages occur. There is a problem with the use. Over time, the sediment accumulated inside the pipes becomes muddy, causing blockages. Therefore, it is a process that should be done frequently. In addition, if you do it yourself at home, it is more convenient to clean with professional help as there is a possibility of damage to the installation.
How Often should ground heating system cleaning be done?
If the installation has just been installed in the house, underfloor heating cleaning should be carried out no later than 2 years. Since hot water from the boiler will cause blockages at different points of the system after a while, heat loss may occur at various points. It is seen that the temperature of some parts in the house is at the desired level and the temperature of some parts is lower. Since this will prevent the homogeneous distribution of heat to the house, the house does not heat up or heat at the desired level. Heat loss and unequal distribution of heat are also reflected in the bill. There may be higher bills than usual.
Which Parts are Cleaned in Ground Heating System Cleaning?
Regular underfloor heating cleaning ensures, above all, that the system lasts longer and operates healthily. Therefore, it is very important to do it at regular intervals. Cleaning, which must be carried out by expert teams, consists of several stages. Inside the system are collectors that distribute combi boilers and lines. And these collectors are the parts that are quickly affected by lime in the system elements. In case of calcification in this part, the system is blocked, water to the lines is cut off and continuous circulation of water is blocked. In addition, if there is calcification in the mouth of the valves that come out of the collectors, the situation reaches worse dimensions. Therefore, underfloor heating cleaning it is important to carry out the procedure and do it correctly. In this process, each part in the system is cleaned separately.
What are the Stages of Ground Heating System Cleaning?
First of all, the connection valve between the boiler and the underfloor heating system is closed. After that, the valves are closed in all rooms with underfloor heating system. The degree of calcification of the pipes in the underfloor heating system is controlled. Then the round-trip hoses of the water coming out of the device are connected to the so-called collectors. Hoses filled with clean water are installed to remove the dirty water from the pipes. By opening the valve of a single room, the dirt and sediments inside are removed from the system. This process continues until the accumulated system is completely finished. When switching to another room, the same process is applied in the other room for underfloor heating cleaning.
How to Use Chemicals in Ground Heating System Cleaning?
The most important stage in cleaning the underfloor heating system is the cleaning of residues such as dirty water, sediment and lime inside. After this process is finished, the device is reconnected to the boiler, bringing the temperature of the water to 30 degrees. When the water reaches the desired temperature, the boilers and valves are closed again and the chemicals used for cleaning are added to the machine so that they are spread homogeneously throughout the pipes. After that, the machine must be started for at least 15 minutes. The chemical cleaning phase of underfloor heating cleaning, as in the first stage, is applied to the necessary places by closing the valves of all rooms.
Is there a procedure to be done after cleaning?
After the cleaning is completely finished, the amount of water inside is checked, just like in the boiler, and it should be completed if there is a water shortage. Meanwhile, the pressure of the system is added to a maximum of 1.5 bar. Afterwards, if necessary for control, the air of the system is taken, the boiler is operated and the heating is checked. After underfloor heating cleaning, the devices must be aired out.
How to Get Air from the Ground Heating System?
The collectors on the device also contain parts called purifiers. These parts are placed in a loose position and the water is expected to reach these parts. If towels are used in the bathroom, the airing parts are opened and the air inside is drained. Air is taken from the boiler. After underfloor heating cleaning, the important thing is to check all areas where there may be air and this air can be discharged and to take the air. Otherwise, various problems may occur in the heating and operation of the system, and even the system may be damaged for this reason. For all these reasons, it must be done by the experts of the business.
You can reach our previous article via https://www.isitmax.com/en-tasarruflu-isitma-sistemi-nedir/ link.