How to Heat From The Screed Without Screech?

How to Heat From The Screed Without Screech?

5 January 2021 by in Uncategorized

Yazının içeriği

Both wet and dry underfloor heating is loved by homeowners for its equal heat dissipation, energy efficiency and compatibility with green heating methods. But while the idea is simple, the practicalities may not be so simple. Here we answer the reader’s questions about the installation of underfloor heating in new construction or renovation projects. Which floors work best with underfloor heating? Are there any drawbacks? How to make underfloor heating without screed?

Which Floor type Should I Choose for Ground Heating?

The best flooring system for any underfloor heating system should be selected according to its thermal conductivity. Ceramic tiles are marbles, since they have the best thermal conductivity and will provide the best heat output. When it comes to wood flooring and underfloor heating, it is necessary to investigate the most suitable type. In each layer, a thick parquet surface that moves in opposite directions should be preferred. This surface is an engineering board consisting of several layers laminated together with the wood vein. Since it is a stable material by nature, expansion and contraction will be minimal. We also want to provide the advantage we provide with the floor type in the field. Knowledge of how to make underfloor heating without screed will be useful for you.

Ground Heating and Laminate Parquet

Thin laminate parquet is less suitable and will need a chipboard or lower deck to ensure regularity. Quality laminate floors and processed boards will probably correct moisture content before lamination. Care should always be taken to adapt to all kinds of wooden floors. To prevent excessive movement of the finished floor, you need to fight with moisture. If you use the knowledge of how to heat underfloor without screeds, you do not need this battle.

Should I Choose a Ground Heating System?

There are a lot of high-quality underfloor heating systems. Moreover, underfloor heating is more effective than its counterparts. The underfloor heating system consists of cables or pipes placed under the floor covering, in which energy (hot water or electricity) is heated. Although in most cases it is placed on top for ease of installation, the installation can be embedded inside the table. This system can also be done with screed-free application. One of the main attractions of underfloor heating without screed is that it reacts quickly when turned on, and the temperature difference under your feet is almost instantly noticeable. The question of how to make underfloor heating without screed is an important question in order to provide this advantage.

Ground Heating vs Radiator

One of the most popular reasons for opting for underfloor heating is that, as its name suggests, it is hidden under your floor covering. This ensures clean lines and open flow throughout your home that are not interrupted by radiators. Thus, you can enjoy large glass areas with underfloor heating and do not have to worry about where to fit your furniture. Freeing up the wall space will also give you an extra sense of space. You can maximize such space gain in your home by answering the question of how to make underfloor heating without screeds .

Ground Heating vs Radiator: Energy Efficiency

Underfloor heating can be extremely environmentally friendly and cost-effective to operate, as long as it is installed correctly and partnered with the right flooring material to transmit heat. Stone, ceramic, wooden flooring is the best. Always consult your supplier before purchasing. The wet underfloor heating system can be approximately 25% more efficient than radiators when paired with a modern condensing boiler. It can be up to 40% more effective when operated from a heat pump.

Is screed necessary?

One of the reasons people ask the question of how to make screed heating is its necessity. Too much can overheat the floor and cause the thermostat to overheat, whereas very little means that the system is running continuously and increases your heating bills. In the case of screed, thicker screeds take longer to warm up. Therefore, the absence of screed is important for both heat transfer and field protection.

What are the Screech-Free Heating Options?

Along with the question of how to make underfloor heating without screed, we will also discuss its options.

Heating Under Parquet Without Screeds

We want renovations and renovations not to take too long. Let’s get to know this system that we can apply directly under the parquet in our projects. After styrofoam application, it can be applied directly on the parquet without the need to pour screed. Styrofoam, which is on average 4 cm thick, has channels that can fit pipes. The transfer of the temperature of the water in the pipe is carried out with special transfer plates. These transfer plates are placed in the channels.

Since there is no mortar manufacturing in the heating system, it is possible to apply the areas quickly. Since the floor will rise approximately 4 cm, there will be no significant difference in the height of the jeans. We talked about that underfloor heating systems are an important solution due to the inability to apply radiators in front of full-size glass. This system allows doors to be opened because it loses only 4 cm.

The most important advantage of the other two methods (concrete cutting and grooving) is at the point of heat loss. Since there is an insulation element under the pipe, there is almost no heat loss to the building elements and the lower floor. Thanks to the heat transfer plates, a rapid heat transfer occurs. The area can heat up very quickly.

Since the water circulating in the underfloor heating pipes is planned to be 45 degrees, there is no damage to the parquets. Thanks to the thermostats integrated into the system, it is possible to adjust the ground temperature at the desired comfort level. Especially in places where the lower floor is empty and the floor does not heat up, the underfloor heating system provides both very good heating and high comfort. The underfloor heating system, which operates under a low heat regime, increases boiler efficiency and makes users smile without compromising comfort with minimum fuel costs. In this system, it is possible to ensure heating only by underfloor heating system without putting radiators in the room. Let’s move on to another answer to the question of how to make underfloor heating without screed.

How to Heat From The Screed: Groove Opening Method

There are advantages to having underfloor heating in living houses in cases where renovations or reconstructions are planned, or in new constructions. This technique, which offers convenience to those who want to innovate, can be the reason of choice, especially since it does not raise the ground at all. Regardless of your existing concrete floor, the system can be planned with grooving machines. Thus, your area height does not suffer any loss.

In this system, after the application of grooves and pipes, there is no need to pour screed on it. Since applications such as tiles or parquet can be made directly, there is no need for mortar construction in the areas. It is possible to complete the installation of the system quickly. One advantage of not having any screed layer between the coating materials to be laid after the pipe and the underfloor heating pipe is the response time. Accelerating response time is a tremendous feature for underfloor heating systems.

Another advantage of the system installed with the groove system is robustness. You can ensure yourself against labor errors and resulting breakages and crushes that may occur compared to the heating technique that is poured.

When we evaluate the system in terms of heat transfer, 117W/m2 for hardwood floors and 150W/m2 heat transfer can be performed in stone floors such as tiles and marble under conditions of 22 degrees ambient temperature and 45 degrees inlet water temperature. This heat transfer rate is sufficient value for heating glass area, extra rooms and places in our cold provinces. We have looked for answers to the question of how to make underfloor heating without screeds for you.

You can reach our previous article from link.

Switch The Language