Pool Heating Frost Prevention Systems

The swimming pool always well-tempered, the garden pond always protected from frost!

  • Suite for any kind of pool
  • 100% waterproof
  • completely silent
  • For garden and fish ponds
  • Can be fitted to any bottom form
  • safe and durable

Hemstedt pool heaters – clearly superior in terms of reliability!

The pool heaters by Hemstedt distinguish themselves from conventional pool heaters in terms of reliability and the need for maintenance – or lack thereof. While a conventional pool heater has to be cleaned often and has mechanical parts that wear out with time, you do not need to worry about any of that with the Hemstedt pool heater. The heating mats are installed into the foundation of the pool itself, without any wear parts or direct contact with pool water. Even if the pool heater would come in contact with water, it would be absolutely waterproof thanks to the patented HEM-SYSTEM.

Energy-efficient electric heating

Since the Hemstedt pool heater is built into the foundation of the pool, the heat can be dispensed into the water from below. The foundation material also serves as heat storage, so you can heat with cheap night current or electricity coming from a photovoltaic system. The necessary, intelligent control units can also be found at Hemstedt.

completely silent

Another advantage of the Hemstedt pool heater is the fact that it is completely silent. That way it can be operated at night or early morning without any problems.

Pond heaters – perfect frost protection for your garden pond

The Hemstedt pool heater can also be built into uneven ground and, thus, can be used as a heating system for your garden pond. That way, fish and amphibians can get through the winter easily. The temperature within the garden pond can be regulated in a way that prevents the surface from freezing. The particular advantage of the Hemstedt pool heater is that no pump is necessary, and adequate frost protection for the garden pond can be ensured even in case of a sudden cold snap. But a pond heater does not only make sense to help animals through the winter, it also prevents damage to pond liner or walls that is caused by cold.

Simple installation

The Hemstedt pool heater is laid into concrete. Proper insulation of the soil below is recommended. Since the heating mats can be cut individually, almost any shape is possible, even installation into uneven ground, for example when it is used as pond heating.

 

Specifications BHF-IM HEATING MAT Item no. 31800

rated voltage 230 Volts
Output ca. 27W/m
cold connection cable 1 x 7.00 m (1.00 mm²)
min. installation temperature 5°C
Max. temperature outer sheath ( red ) 65°C
min. bending radius 5 x dA
resistance tolerance -5 %/+10 %
cold/warm splice sleeveless, without shrinking tube
diameter ca. 7.50mm
Insulation XLPE
Delivery width ca. 0.80 m
Calculation width ca. 0.90 m
Switch The Language
    Cart
    Sohbeti Başlat
    ISITMAX A.Ş
    Merhaba, ben Volkan Şimşirkaya. Ürünlerimiz, fiyatlar, teknik destek ve diğer konularda hızlıca yardımcı olabilirim. Lütfen sohbet başlatınız