Roof Parapet heating

Roof Parapet heating

 325,00 +kdv

It is a heating system for preventing snow accumulation in parapet and ice barrier areas of residential and commercial buildings. You can place an order by choosing or contact our company.

  • RoofMax Series Heating Brochure
  • T2MaxPro / HMax Datasheet
  • RoofMax Series Installation Guide
  • RoofMax Series Warranty Certificate
  • Roof heating References
  • Stocked / Ready to Install
  • 9 Installments / Free Shipping
  • 30 Days Return Guarantee
  • 15 Years Product Warranty
  • Best Price Guaranteed

About the Product: For detailed information about our heating product for preventing snow and ice on roofs, you can visit our address . This page shows the pre-prepared roof edge heating kit for heating purposes, ready for installation.

Snow and ice prevention solutions can cover a wide range of usage areas on the roofs of villas, residences, commercial buildings, public institutions or industrial buildings. Roof parapets from these areas are seen in the following figures.

Aesthetic Appearance: They are made to hide the slope of the roof, to prevent the appearance of hidden streams or to create a set on the roof edge for railing purposes. Depending on the wind direction or different variables, parapet areas can become areas where snow accumulation and ice barrier problems occur. Heating at these points is important to prevent structural damage.

Structural Parapet Areas: The merging of two buildings, multi-layered structures or architectural units (windows, ventilation, exit to the roof, etc.) that create an elevation on the roof surface are the areas where snow accumulation is observed intensively. Heating is recommended if there are parapet areas that pose a risk to prevent drainage problems or structural damage. The heating system consists of laying the heating cables with 8 cm ( CC ) intervals in an area of 50 cm width in areas where there is a risk. Different mounting accessories are used for metal clamped roofs or membrane surfaces. Installation details are detailed in the product brochure and user manuals.

Selecting Product Variations

Heating Area: Determining the area to be applied is necessary to choose the amount of cable you will need in your order. If there are areas that are independent from each other, order over the total area and contact the company and give details so that your products are ready for assembly.

Roof Covering: Different mounting accessories are used on roofs with metal or membrane surfaces.

Temperature Control: Your roof heating system should be controlled by thermostat and sensor. At this point, different control units come to the fore.

  1. Ekoline Series Control Panel : It is surface mounted. It comes with a rail type digital thermostat and temperature sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. The system works when the air temperature drops below +2C, and turns off when it rises above +3C. This setting is standard by default. It can be changed easily.
  2. Proline Series Control Panel : Even if the weather is below zero degrees, there may be no icing. In this case, the heaters will work in vain. To prevent this, an extra humidity sensor is added to the temperature sensor. It is surface mounted. The rail type digital thermostat comes with a temperature sensor and an external humidity sensor. It is shipped ready for installation with fuses and contactors of appropriate amperage according to the installed powers. When the air temperature drops below +2C and the humidity sensor detects precipitation, the system starts up, and when the temperature or humidity sensor presents appropriate values together, the system shuts down. This setting is standard by default. It can be changed easily.
  3. Maxline Series Control Panel : It has the same features as Proline series control panel. The temperature regulator and sensors used in the panel are EBERLE brand. Eberle comes as a set with temperature regulator , temperature sensor , humidity sensor .

Installation: Our roof heating systems and the selections are sent ready for installation. If you see fit, you can add our in-Istanbul assembly service to your order. For out-of-town applications, it may be necessary to contact our dealers and obtain exploration and assembly information.


We offer 3 guarantees for our Roofmax series product.

  1. 20 Years SAFEMAX Warranty: Our Roof Heating Cables (TmaxPro, Hmax) are produced with UV resistance in design and with the engineering and raw material infrastructure required for at least 30 years of outdoor operation. In case of a manufacturing defect, product replacement (construction works belong to you) or refund (up to the invoice amount) is contractually determined in line with our SafeMax Warranty procedure. We are proud that we have not had any defective products since 1995.
  2. Thirty-day Return Guarantee: You can return the product you purchased within 30 days in case of an unopened box, wrong order, abandoned product or a problem caused by us. Special order products are not included in this scope.
  3. Best Price Guarantee: As Isitex, we are very confident in our products and prices. If you want to trust us and buy the same product from us, even though we are more expensive; please let us know where you got a better price ( ) we promise to reduce our competitor’s price to one click symbolically. If you would like more detailed information about warranties, please visit our SafeMax Page .

Note: The product you purchased is sent ready for assembly with the connections made. However, we recommend that you do not make power connections without a qualified electrician.

Note: Our RoofMax series roof heating products are suitable for use together. You can connect a different RoofMax series product to the control panel that comes with the product you purchased. Please contact us about this.

Switch The Language