Cable Types
TSA Heating Cable Model (Click for product details)
- Tank, Pipe, Valve etc instruments; frost prevention and temperature preservation,
- In roof and rain downpipes; They are used for heating purposes to prevent snow and ice.
TSL Heating Cable Model (Click for product details)
- Tank, Pipe, Valve etc instruments; Heating to prevent frost and maintain temperature
- Max. To maintain temperature up to 65C
- It can be used in carbon steel, stainless steel, painted or unpainted iron and plastic pipes.
TSS Heating Cable Model (Click for product details)
- It is used in large pipelines of industrial establishments to prevent freezing and maintain fluid temperature.
- Max. To maintain temperature up to 120C
- Not for use on non-metallic surfaces
TSU Heating Cable Model (Click for product details)
It is used in large pipelines of industrial establishments to prevent freezing and maintain fluid temperature.
Max. To maintain temperature up to 200C
The most suitable solution for high temperature needs
Not for use on non-metallic surfaces
Self Regulating Cables; It is a kind of heating conductor that can independently adjust the amount of heat depending on the ambient temperature. The design of the conductors is quite simple. Two copper conductors transmit voltage along the entire length of the wire. Conductive matrix; heating and adjusts the amount of heat produced. Design also; It can be optionally purchased with a protective metal shield layer that protects the product from electromagnetic effects. In this way, it protects the cable against mechanical damage. The most specific feature of the cable is that it can limit itself according to the temperature of the region it is in. Other advantages are;
There is no need to use a thermostat. The temperature is optimally controlled by the cable itself.
Unlike resistive cables, the heating function is not limited by the length of the cable. It can be cut from the desired place or used as a single piece in the desired length.
Energy efficiency is at the highest level. Thanks to the ability of the product to limit itself according to the ambient temperature Each section is independent and regulates its temperature independently. If one part of the wire lies in the sun and the other is frozen in the ice, it is precisely the more heat in the ice that radiates.
Unlike resistive cables, the possibility of overlapping cables during assembly does not pose a risk for self-regulating heat trace cables.
No maintenance is needed.
Due to the technology and material quality used, it has a higher price compared to series resistant cables. Considering the long-term, thanks to energy saving, the gap is closed.
usage areas
For the purpose of melting snow and ice on the roofs and gutters of residential, commercial and industrial establishments.
In order to evacuate the melt water in the rain downpipes without freezing
For frost prevention in sewer pipes
Oil Pipelines for Process Heating
Gas pipelines are used for heat trace purposes.
APPLICATION
The presence of professionals is not always required for the installation of a self-regulating heating cable – you can do all the necessary steps for installation yourself.
Depending on your goals, you can do an internal or external installation. To work with a narrow pipe placed under the ground, you need to purchase a system with the appropriate insulation class: the cable is pushed into the pipe, and then it can be connected to the network. If we are talking about external installation, then the cable is attached to the surface with aluminum tape and insulated with special insulation. if you are talking about wide pipes, you have to bend the wires around it.
Important!
Cables selected in different strengths for different conditions. Low-temperature models are suitable for indoor installations with a maximum heating power of 15 W / m, 65 ° C. If we are talking about heating pipes of average diameter, anti-icing systems, then it is better to choose products that can heat up to 120 ° C with a power of 30 W / m. If we are talking about industrial plants, pipes with a large diameter, then the preferred option is models with a maximum heating of up to 190 ° C and a maximum power of 95 W / m.
Self-regulating heating cable is an excellent solution for heating pipelines, sewers and roofs. If the cable that best suits the technical requirements is selected and the installation is done correctly, the result will meet the highest expectations.
