Watery vs Electric Ground Heating in Baths

Watery vs Electric Ground Heating in Baths

23 December 2020 by in Uncategorized

Baths have been used in Anatolia since ancient times. Although we know that the baths are structures from the past years to the present, it has also been a question of how turkish baths are followed in terms of heating. Even in the historical baths, it is difficult to achieve and has an excellent heating system. It is still possible to see heating systems in many historical baths thousands of years old. So much so that even in large-scale baths, high-grade temperatures captured in the environment and running water are difficult to produce and maintain for long periods of time and require high energy. Therefore, there were usually heating rooms at the bottom of the baths whose sole purpose was to provide these heating processes. Here, the waters and bath environment were warming with the steam usually produced by burning processes made with coals in the past years. What is watery vs electric underfloor heating in baths? What should it be like? Keep reading our article…

With the warmth of this fire, it was ensured that the bath floors and walls were heated. Since the first area heated by fire is the belly stone from the so-called hellish section, the hottest area in the baths is the belly stone. Other areas of the bath are also heated by the circulation of smoke pipes. This is the main purpose of the method we apply today. The other regions with the warmest belly stones are relatively warm compared to the belly stone.

These days, two main systems stand out when it comes to bath heating . These are heating processes with water pipes or electrical cables installed throughout the bath. We have compiled watery vs electric underfloor heating in the baths for you.

What is a Water heating system in baths?

The system, which uses polymer pipes, can be easily applied in many different places. The most important aspect of this system is that it is easy to implement. It is the point that matters at what stage rather than what the structure is. Today, this heating system; it is used in apartments, villas, mosques, hospitals, baths, pools. It can also adapt immediately to systems such as combi boilers, heat pumps or solar energy. There can be no mention of any ground restrictions for this system. But we’re going to talk about the water heating system for the hammocks.

It is preferred in large-size baths in aqueous heating system. The reason is low cost and energy saving. Heat control in the aqueous heating system is more difficult than electric heating. In the baths, water-piped heating can be done by circulating hot water from pipes laid under marble. As well as connecting to an existing heating system, the system’s hot water needs are met by solid fuel boiler, boiler or heat pump.

The pipes used in watercolor heating must be suitable for heavy working conditions.

After talking about the water heating system, let’s move on to another point of watery vs electric underfloor heating in the baths.

What is electric floor heating system in baths?

In today’s conditions, heating the bath floor areas with electric heater cable applications is much more practical and the installation cost is quite low. Wired bath heating systems are very controlled and have fast heating. Our wired bath heating systems start to heat the marbles in 20-30 minutes and usually the hammam is ready for use in 1-2 hours.

In electrical wired bath heating systems, any part of the bath can be heated. As standard, the floor, back area, seating area and belly stone are heated in the baths. If desired, we can adjust the temperature of each region separately. We can adjust the belly stone 60 degrees, the back and seating surface 40-45 degrees, the footing area 40 degrees. Or we provide control according to the internal temperature of the bath with a single thermostat with remote sensor.

Heater Cable Safety

The system is made entirely with armored heater cable and the system heater cable system is designed to be turned off in case of any leakage. The sensitivity of the companies in this regard is high. After discussing this safety point, let’s examine the issue of water vs electric underfloor heating in general in general. In baths, water etc. electric underfloor heating systems, the subheading we need to talk about for the electrical system is safety. Although electric underfloor heating systems may sound unsafe, there is no safety problem with the next generation of technologies. Electric underfloor heating system is one of the most preferred methods in recent times.

Heatmax’s professional team will analyze the floor and the underfloor heating system to be laid, building a system that is problem-free in terms of safety.

Watery vs Electric Ground Heating Assessment in Baths

  • Cost: The biggest point of the systems made to the baths that can challenge you is the cost, which we should talk about in the first place. The quality of the cables determines the cost of installation in the absence of electrical wired bath heating. At the same time, the quality of materials used in the tubular bath heating system directly affects the price. However, we think that the cost should not be avoided due to both the continuity of the system and the process of repair.
  • Setup: In terms of installation, we can say that the electric system has taken a step forward. Installation of electrical systems is carried out in a very short time. But the watery underfloor heating system is a little more laborious. When it comes to hotel-type underfloor bath heating , installation is easily done with digital thermostats. Thus, the control of the heating system will also be in the user. It is less laborious than other heating systems.
  • System Failure: The electric heating system works for life if installed correctly. The lifespan of the armored heater in the case of cable use is approximately 100 years. It works for life as long as there is no direct interference with the cable in any way. The aqueous heating system, just like the electric system, heats without problems for 50-100 years with the right design and installation. There are no parts to fail unless there is outside interference.
  • Warm-Up Time: The electric system is very fast in this regard. Approximately 1 to 4 hours after the system is opened, the system still comes in. In the aqueous heating system, it is quite late, as is 24 hours.
  • Security: There is no safety hazard if the heating cable is safe and not added manually. In the aqueous system, there is no safety hazard.

Controls and Additional Information:

  • Temperature Control: The temperature control of the electric system is very precise. Remote sensing sensors are placed under the marble to stop the system at the desired temperature value. In the aqueous system, very precise temperature control cannot be performed. In tubular system bath heating, it makes it difficult for the system to enter the heating too late and to leave too late without heating. It takes a lot of expense for precise control.
  • Regional Control: The baths have their own belly stone, back area, floor and seating areas temperatures. In the electric underfloor heating system, this can be adjusted with the heater cable. Each region can be heated in individual temperatures. In the aqueous system, the general temperature value of the bath is the same. However, temperature adjustment can be made by using different design shapes during the application phase.
  • Power Supply and Installation Status: The power supply (engine room) does not require distribution installation. Depending on the size of the bath, the process can only be completed with an electric panel or a single thermostat. In the aqueous system, it requires the engine room and distribution installations, including the boiler. Collector space, where pipes are distributed and collected, is also needed.
  • Uses: Electric heating systems are generally preferred to be used for small-to-medium baths such as home baths, villa baths, hotel baths, medium-sized baths and massage parlors. Aqueous heating systems are preferred where there is a cheap energy source. It is preferred in heat pump applications or thermal hot water sources.
  • Warranty Periods: The warranty periods in electric bath heating systems are on average 20 years. However, this water bath is limited to an average of 10 years in heating systems.

We have compiled baths water etc. electric underfloor heating systems for you. If you want to have the highest quality bath heating systems, do not forget to get support from our company.

You can reach our previous article from https://www.isitmax.com/yerden-isitma-isitmiyor-problemi-ve-cozumu/ link.

Switch The Language
    Cart
    Sohbeti Başlat
    ISITMAX A.Ş
    Merhaba, ben Volkan Şimşirkaya. Ürünlerimiz, fiyatlar, teknik destek ve diğer konularda hızlıca yardımcı olabilirim. Lütfen sohbet başlatınız