Description
You can choose IzoMax 2mm Technical Felt as your insulation option. Heaters will be fixed to the tank surface with a specially prepared metal buckle palaska.
Max. Heating in industrial tanks and storage equipment with a diameter of 2 meters is made with Polyester belts. According to the laying plan of the heating cables and the condition of the tank surface, polyester belts are stretched on the tank surface, allowing the heating cables to operate in certain form for many years.
Stretching straps are stretched with the help of a metal buckle.
Stretching straps are attached to the most extreme parts allowed by the tank and fixed with buckles.
Starting from the side where the energy supply line comes from, the installation is carried out as shown below, following the cable ranges in accordance with the technical specifications.
Min.25cm – max for constant stop of heating cables placed on the tank surface for heat trace purposes in a certain range and form. Polyester belt support is discarded with a range of 50cm.
Finally, we’re going to have to the heating cable may be loose compared to other areas at some points. This is normal. Loose cables are supported by fixing them to the tank surface with aluminum tape. Thanks to this support, the looseness of the cables is prevented, the advantage of the heat dissipation of aluminum is taken advantage of and, most importantly, it prevents parts such as insulation wool from entering between loose cables and the tank surface.
